Tag:industrial and municipal wastewater



bbk 000000

UDC 628.35

SHVETSOV V. N., MOROZOVA K. M., Stepanov S. V.

Designing facilities for municipal and industrial wastewater biological treatment in aeration tanks with nutrients removal


Biological treatment facilities are the basic facilities for the purification of domestic, municipal and industrial wastewater of most of the industries (chemical, petrochemical, oil refining, food, textile, consumer goods, coke-chemical industries, agriculture etc.). However until now there has been no scientifically-grounded method of designing wastewater biological treatment facilities with nitrogen and phosphorus removal in the Russian Federation. Many years of extensive research carried out by NII VODGEO and «Water Supply and Wastewater Disposal» chair of the Samara State Technical University at the laboratory and pilot plants, at the operating facilities with processing data bulks provided for developing an adequate method of designing aeration tanks with nutrients removal. The presented method is a supplement of the method of process design of biological treatment facilities stated in SNiP 2.04.03-85 with regard to designing aeration tanks with nitri-denitrification and biological phosphorus removal; and provides for the calculations of upgrade and new construction of the facilities for biological treatment of municipal, domestic and industrial wastewater. Behind the process design is the concept of the process description with enzyme kinetics equations. The method includes the following stages: substantiation of the relevant basic data on the flow rates and qualitative composition of wastewater; determination of the process flow scheme and burden balance calculation of all the critical pollution components; determination of the kinetic constants and coefficients of enzyme kinetics equations of the transformation of each basic pollution component (BOD, nitrogen compounds, phosphorus etc.) and activated sludge growth by the statistical analysis of the operation data and chemico-analytical analysis of wastewater samples of the operating treatment facilities, by experimental data or on the basis of the available analogies; calculation of the volume of all the elements of the facilities with determination of the limitative component and treatment level in relation to other pollutants; final correction of the vo­lumes and parameters of all the process zones with account of the requirements to the level of treatment in relation to all the dictating pollution components. An example of the calculation is set. It is noted that the computation algorithm and formulas included into the method provide for designing any complicated process flow schemes with nitrogen and phosphorus removal applied both to municipal and industrial wastewater. The method provides for calculating not only the rate of removing BOD and nitrogen compounds but also other certain pollution components (oil products, detergents, fats etc.) offering additional opportunities of the wastewater biological treatment method. The method is especially useful in designing industrial wastewater biological treatment facilities because most of the foreign methods are mainly focused on the purification of domestic and municipal wastewater to the concentrations adopted in those countries. The method is developed on the principle of essential sufficiency; however is contains 70 design parameters and 28 formulas and equations. Accordingly the calculations are performed in Microsoft Office Excel which makes it possible for users even with middle software skills. Herewith it is possible to perform calculations straight for several options interactively and/or upgrade the treatment facilities in the process of their operation.

key words

, , , , , , , ,


mvkniipr ru 

Российская ассоциация водоснабжения и водоотведения

WST19 200x300

Конференция итог